首页 > 兴趣百科 > 手工制作 > 如何制作南瓜灯

如何制作南瓜灯

时间:2018-07-10   来源:手工制作   点击:

【www.gbppp.com--手工制作】

如何制作南瓜灯 第一篇_亲子手工制作南瓜灯

我们如何做到

将报纸撕成小块,孩子们都很喜欢这一步哦!然后吹一个气球。

倒出半瓶胶水到1/4杯的清水中,慢慢搅匀。

将小块报纸放入调好的胶水中,然后拿出,轻轻地贴在气球上。你需要粘贴三四层的报纸在气球上哦!为了确保每一涂层间的干燥,我们使用了一个吹风机,来加快这一进程。

等到报纸完全干燥后,将气球尾端剪出一个开口,然后将气球取出。

你也可以稍稍设计一下,在圆口剪出一个漂亮的花边,

【如何制作南瓜灯】

用橘红色丙烯漆装饰一下,并画上大大的眼睛,小小的嘴,就变成一个可爱的大南瓜了啊。

等到油漆彻底干后,在小南瓜的两侧分别剪出两个小小的圆孔,将细绳穿过,我们就可以提着做好的南瓜盒去讨糖了!

如何制作南瓜灯 第二篇_幼儿园手工制作:南瓜灯的手工做法

南瓜灯的手工制作方法如下:

第一步,在南瓜上面画出鬼脸的轮廓;

第二步,用彩色的笔将轮廓勾勒出来,然后将南瓜上面的盖子抠掉,将勺子抠出南瓜的肉,让南瓜的皮变薄;

第三步,抠完以后,将蜡烛放到南瓜里面,然后点上蜡烛,就可以看出灯的效果了; 提示:在南瓜的制作过程中,南瓜和勺子的配合一定要好,希望爸爸妈妈能够陪同孩子一起进行制作哦。

如何制作南瓜灯 第三篇_南瓜灯制作图片

【如何制作南瓜灯】【如何制作南瓜灯】

如何制作南瓜灯 第四篇_南瓜灯制作方法

1.切割:

在南瓜的顶/底端,用小刀将瓜面切除一块,以便伸手进去掏空瓜瓤。切面尽量平整。

2.掏空打薄

用特制的勺子或日用勺子也可,将瓜籽和瓜瓤小心掏出来。选定您准备进行雕刻的地方,将那块瓜皮刮薄至1英寸厚。

掏空打薄

3.粘贴纸脸谱

在选定处,粘上或者钉上事先准备好的纸脸谱。使用图钉时,注意钉在脸谱的虚线处,这样可以避免瓜面上出现小洞洞。

4.沿虚线描刻

沿纸脸谱的虚线边,用小锥或图钉在南瓜皮上描出脸谱。完成之后,撕下纸脸谱。

【如何制作南瓜灯】

延虚线描刻

5.观看效果

最后用小锥子点对点地再修正一番。

1、切割。

在南瓜的顶/底端,用小刀将瓜面切除一块,以便伸手进去掏空瓜瓤。切面尽量平整。

2、掏空打薄。

用特制的勺子或日用勺子也可,将瓜籽和瓜瓤小心掏出来。选定您准备进行雕刻的地方,将那块瓜皮刮薄至1英寸厚。

3、粘贴纸脸谱。

在选定处,粘上或者钉上事先准备好的纸脸谱。使用图钉时,注意钉在脸谱的虚线处,这样可以避免瓜面上出现小洞洞。

4、沿虚线描刻。

沿纸脸谱的虚线边,用小锥或图钉在南瓜皮上描出脸谱。完成之后,撕下纸脸谱。

5、观看效果。

最后用小锥子点对点地再修正一番。

诀窍

制作南瓜灯的瓜要确定是新鲜的,它应该生而不软,并且没有腐烂、发霉和损伤。 南瓜的正面应该尽可能的光滑以便将雕刻图案印到上面。

使用带有锯齿形刀刃的锯子或小刀在南瓜上挖一个角(将刀指向南瓜的中间部分),这样盖子就不会掉到南瓜中了。

对歪斜的南瓜,在南瓜的底部挖一个洞可以很方便地固定歪斜的南瓜。

雕刻到南瓜灯上的图案可以很简单、奇特,但是如果事先在纸上将其画出来,可能会更容易一些。

点亮南瓜灯的最好方法是使用蜡烛。蜡烛的光是暖色的,并且它自然闪烁的火焰会给人一种怀旧的感觉。

在切割的边缘擦上一些凡士林以防变干。使用蜡烛时,在南瓜顶部挖一个小洞作为散热的烟囱。

不使用时,应将它放进塑料袋中并储存在冰箱里。若要将皱缩的南瓜恢复原状,只需将其在一盆冷水中浸泡一整夜即可。

如何制作南瓜灯 第五篇_南瓜灯做法

Ingredients 原料

1 (8-ounce) package cream cheese, softened 一包奶油芝士(约230克),常温下软化 2 cups canned pumpkin, mashed

两大杯罐装南瓜,压碎(如果没有罐装的南瓜也无所谓,大家尽可以买新鲜的南瓜回来煮熟、压碎) 1 cup sugar 一大杯糖【如何制作南瓜灯】

1/4 teaspoon salt 1/4 茶勺盐

1 egg plus 2 egg yolks, slightly beaten 一个鸡蛋、加两个蛋黄,轻轻打散 1 cup half-and-half

一大杯牛奶和奶油的混合物,各一半(half-and-half 是对这种混合物的简称) 1/4 cup melted butter 1/4 杯融化的黄油 1 teaspoon vanilla extract 1茶勺香草香精

1/2 teaspoon ground cinnamon 1/2 茶勺肉桂粉

1/4 teaspoon ground ginger, optional 1/4 茶勺姜粉,备用 1 piece pre-made pie dough 1个做好的饼皮(超市可买) whipped cream, for topping 鲜奶油,点缀用

Directions 制作步骤

1. Preheat the oven to 350 degrees F. 1. 预热烤箱至350华氏度(约摄氏180度)

2. Place 1 piece of pre-made pie dough down into a (9-inch) pie pan and press down along the bottom and all sides. Pinch and crimp the edges together to

make a pretty pattern. Put the pie shell back into the freezer for 1 hour to firm up. Fit a piece of aluminum foil to cover the inside of the shell completely. Fill the shell up to the edges with pie weights or dried beans (about 2 pounds) and place it in the oven. Bake for 10 minutes, remove the foil and pie weights and bake for another 10 minutes or until the crust is dried out and beginning to color. 2. 将买来的现成饼皮放到一个约9寸的烤盘中,将边缘和底部都压紧。在边缘上切压出漂亮的褶皱。把饼皮冻回冰箱约1个钟头左右、使其紧实。1小时后,用一张铝箔纸(锡箔纸亦可)将饼皮包裹起来,在铝箔纸上放上重物(厨房用语称为pie weights,也可用豆子代替。作用就是使派的饼皮烤出来更成型)放入烤箱。先烤十分钟、再把重物和铝箔纸去掉、烤10分钟,或烤到饼皮变干、上色。 3. For the filling, in a large mixing bowl, beat the cream cheese with a hand mixer. Add the pumpkin and beat until combined. Add the sugar and salt, and beat until combined. Add the eggs mixed with the yolks, half-and-half, and melted butter, and beat until combined. Finally, add the vanilla, cinnamon, and ginger, if using, and beat until incorporated.

3. 烤了饼皮,就来做馅儿吧!在一个大碗里先打散奶油芝士、跟着加入南瓜泥,继续搅拌融合。加入糖和盐搅拌,再加入鸡蛋、蛋黄、奶油牛奶和融化的黄油,一起搅拌均匀。最后再加入香草、肉桂、姜粉一起混合。

4. Pour the filling into the warm prepared pie crust and bake for 50 minutes, or until the center is set. Place the pie on a wire rack and cool to room temperature. Cut into slices and top each piece with a generous amount of whipped cream. 4. 将馅料倒入预先烤制的饼皮里,一起烘焙50分钟。或者你可以试试看派的中心是不是都成型了,来判断是否烤好。烤好之后将派放在铁架上冷却至室温。分块切好、每块浇上奶油!

【如何制作南瓜灯】

最后开动吧!祝大家万圣节好胃口!

You need:

1 short, sharp knife 1 dessert spoon 1 teaspoon

1 candle or tea-light

Plenty of newspaper to protect work surface Large bowl for pumpkin seeds and flesh

Step One:

Cut a circular hole around the stalk.

Tilt the point of the knife into the centre of the pumpkin. This will stop the lid from falling in.

Step Two: Scoop out the seeds and any loose flesh using the dessertspoon and the knife if needed.

Step Three: Sketch the face onto your pumpkin. Use a biro so any mistakes can be scrubbed off with a scouring pad or fingernail.

Step Four: Carefully cut out the features. Take small cuts and use a puncturing motion rather than a slicing one.

Step Five: Gently scrape away the flesh on the inside of the face until it is only 1cm thick.

Step Six: Using the knife, mark a circle the size of your candle or tea-light in the centre of the base.

Step Seven: Carefully hollow out the marked area with the teaspoon.

Step Eight: Place your candle in the hollow, light it and replace the lid of your jack-o'-lantern.

本文来源:http://www.gbppp.com/xq/461362/

推荐访问:创意南瓜灯制作 卡纸制作南瓜灯

热门文章